 |
| |
 |
| Sphinx
Solid Carbide Drills |
|
Sphinx |
has
been producing quality high-precision drills for over 125 |
years.
Sphinx, with its lineup of solid carbide, high speed steel and micro
drills is an excellent choice for increasing production capacity and
workpiece quality. With it's extensive lineup of unique geometry drills;
Sphinx is the answer to problem drilling. Sphinx drills are available
in a wide range of sizes, both inch and metric. For more difficult
applications, special order drills are available. For more information
on Sphinx, please contact the BIG Kaiser Engineering
Dept.
|
| |
| Sphinx
produces 1,200,000 different drills, many custom specials, including about
1,200 different standard drills. These high precision cutting tools are
used in applications from every industry worldwide. |
| |
 |
| |
| |
 |
|
|
A
Sphinx micro drill as seen under
a high power microscope next to a human hair. ( The average human
hair is 0.0035"). |
|
The
precise grinding of Sphinx carbide micro drills made visible through
a high precision microscope. The image on the far right is a further
enlargement of the drill geometry. |
|
| |
| Click
here for Sphinx Drill Selection & Cutting Data Table (3.07 MB) |
| |
| General
Overview of Sphinx Drill System |
| Click
on an image below to view the related page of the Adobe PDF file |
| or
download the entire catalog by
clicking here (3.07 MB) |
| Please
be patient, Download Times Vary With Your Internet Connection Speed! |
| |
NEW!!! |
NEW!!! |
Quadro
15 PLUS Drills |
Phoenix
Drills |
|
|
- Solid carbide
- Ultra-high speeds and feeds
- Special tip geometry
requires less cutting force
- Standard coolant through
- Balzers coating
- For stainless steel, steel, cast iron and non-ferrous materials
- Available
from Ø4-20mm
|
- Solid carbide
- Ultra-high speeds and feeds
- High performance point and flute geometry
- Coolant
through after Ø2.5mm
- Balzers coating
- For stainless steel, steel, cast iron and non-ferrous
materials
- Available
from Ø1-4mm in increments of 0.1mm
|
| |
|
|
| Micro-Drills |
Twist
Drills |
Spicut
Twist Drills |
 |
 |
 |
- H.S.S. Ø 0.002" - .087"
- H.S.S. Ø 0.05mm - 2.20mm
- Carbide Ø 0.0039"- 0.0971"
- Carbide Ø 0.10mm - 1.45mm
- Reinforced Shank & four facet grinding.
|
- Solid Carbide Construction.
- Inch Ø 13/64" - 3/4"
- Metric 3mm - 20mm
- Coolant fed up to 5xØ standard.
|
- Solid Carbide Construction.
- Inch Ø 0.028" - 0.551"
- Metric Ø 0.70mm - 14.00mm
- Degressive helix angle to aid chip evacuation.
|
| |
|
|
| Posicut
Twist Drill |
Asycut
Drill Reamer |
Tricut
Drill Reamer |
 |
 |
 |
- H.S.S. Ø 0.002" - .087"
- H.S.S. Ø 0.05mm - 2.20mm
- Carbide Ø 0.0039"- 0.0971"
- Carbide Ø 0.10mm - 1.45mm
- Reinforced Shank & four facet grinding.
|
- Solid Carbide Construction.
- Inch Ø 13/64" - 3/4"
- Metric 3mm - 20mm
- Coolant fed up to 5xØ standard.
|
- Solid Carbide Construction.
- Inch Ø 0.028" - 0.551"
- Metric Ø 0.70mm - 14.00mm
- Degressive helix angle to aid chip evacuation.
|
|
| |
| Quadro
Drills |
Key Features & Benefits of
Sphinx Precision Drills:
- High Precision Solid Carbide Drills that offer high performance
and close tolerance.
- Sphinx Quadro Plus drill has a finishing capability of RA
0.4u (16rms).
- Internal Coolant Capability for added performance and durability.
- Standard Sphinx drills are available in 3xØ and 5xØ,
all sizes, stock standards.
- Sphinx Quadro Plus Drills are available in diameters from
3mm (.118") to 20mm (.787"). Quadro plus drills are
also available in two lengths, six times diameter without internal
coolant, or 12 times diameter with through the tool coolant.
- Applications for Sphinx drills include gray cast iron, malleable
iron, ductile cast iron, copper alloys, aluminum alloys and
graphite.
|
 |
- Inch Ø 0.012" - 0.787"
- Metric Ø 3.0mm - 20.0mm
- Up to six guide pads for excellence in hole sizes and straightness.
|
|
| |
| This
website is best viewed with Microsoft Internet Explorer Version
6.0 and Adobe Acrobat. If you do not already have these programs,
click on the icons below to download them for free. |
| |
| For
Best Viewing, Set Display Resolution @
1024 x 768 or Higher |
|
|
|
Questions
or comments about this website?
Contact
Us Here
Copyright © 2003 BIG Kaiser Precision Tooling Inc. All Rights Reserved.
All Content Proprietary to BIG Kaiser Precision Tooling Inc. & HKAG.
BIG Kaiser Precision Tooling Inc.
641 Fargo Avenue - Elk Grove Village, IL 60007
Phone: 1-847-228-7660 * (Toll-Free) 1-888-TOOL-PRO (1-888-866-5776)
* Fax: 1-847-228-0881 |