BIG Kaiser Higher Precision Guaranteed
View the site en Espa˝ol
Search the site:
 
Products >> Milling Tools >> Speed Finisher

Speed Finisher: High Speed Cutter for Aluminum & Cast Iron

Mega Synchro Tapping Holder

Speed Finisher is a high speed cutter for aluminum & cast iron offering mirror-like finishes. Each cutting edge height is adjustable to within 1μm of each other.

 

 

 

A product of:

Speed Finisher Flv


Mega Synchro Tapping Holder in action

Features:

  • Quick adjustment of cutting edge height

  • Lightweight and high rigidity

  • Cutting speeds up to 13000 SFM

  • Secure coolant supply to the cutting edge

  • Optional exclusive presetter

A Variety of Speed Finishers Sizes

BCV 40/50 Tapper

Cutting Dia.: 50mm, 63mm, and 80mm


Light Weight & High Rigidity


The low-profile cutter body enhances rigidity, minimizes vibration and distortion, which leads to the minimized height difference of the machined surface. Lighter weight resulting from reduced mass aids performance on small machine tools such as BT30 spindles.

Secure Coolant Supply to the Cutting Edges


Coolant is supplied to the cutting edge directly when used in combination with the Face Mill Arbor Type FMH. This is especially effective in avoiding built-up edges when cutting aluminum and possible re-cutting of the swarf.


   

Quick Adjustment of Cutting Edge Height
After clamping the insert, the lifting screw lifts up the insert directly by revolving the lifting nut from the side. Simple construction aids in easy adjustment and the fine pitch thread of the lift screw ensures precise adjustment.

The exclusive PL Presetter shortens the setup time further (up to 15 sec./insert) while avoiding chipping of the cutting edge.




Application Examples (Cutter Diameter: °80mm)

Workpiece

Conditions

Surface
Roughness

Height
Difference

No. of
Workpieces

Result

Cutting Speed: 13,123 SFM
Spindle Speed: 15,900 RPM
Feed Rate: 376 IPM

Ra=.07μm
Rz=.32μm

Within 1μm

320

Mirror finish is achieved





Speed Finisher Inserts

DA220
High density sintered material made of ultra-micro diamond particles. Superior wear resistance and hardness comparable to carbide alloy.

CBN
Newly designed CBN sintered body with high content rate of CBN improves toughness and thermal conductivity.