Pre-assembled Chucks
Unilock Zero Point Clamping Workholding System

Just as the name implies, the chucks are sold mounted to a base plate. The base plate provides easy mounting of the chuck to the machine table as well as a pre-plumbed air supply. All bases provide either notches or a ground edge to square the chuck to the machine table.

Pre-assembled Chucks





A Variety of Pre-assembled Chucks




MLM 150 - Single Table Chuck


Features:

  • Base plate for mounting on machine tables

  • Air supply from side of base plate

  • Optional timing notch in face of chuck

  • Keyways on bottom for positioning on work table



Available with Notch

For applications where a timing pin is
required, the MLM series of chucks can be ordered with a timing pin notch integrated into the face of the UNILOCK chuck.


MCM 150 - Single Table Chuck


The MCM 150 is prepared to accept 4 hardened 12mm index bushings, one every 90 degrees. Order 1 index bushing to orient a pallet with a single knob. If you need to execute multiple 90 degree indexes, additional bushings can be installed.

Features:

  • Base plate for mounting on machine tables

  • Air supply from side of base plate

  • 90 degree (4x) indexing

  • Keyways on bottom for positioning on work table



DCM 200 - Double Table Chucks


Features:

  • Base plate for mounting on machine tables

  • Air supply from side of base plate

  • 4 x 90 degree indexing on DCM version

  • Optional timing notch in face of DLM chuck

  • Key ways on bottom for positioning on work table




DLM 200 - Double Table Chucks


The DLM 200 chuck does not have timing pin bushing
locations. If you want to orient a double pallet with
this chuck, add one timing pin notch. If you need to run 2 single pallets add a timing notch for each chuck.

Features:

  • Base plate for mounting on machine tables

  • Air supply from side of base plate

  • Optional timing notch in face of DLM chuck

  • Keyways on bottom for positioning on work table



QC 400 Quad Table Chucks


The Quatro-Light-Clamping base has four ESM 138 chucks fed with a single air connection from the side. The steel plate includes two G 1/4" air connections, on the front edge and on the back edge. One of the air connection points is plugged and the other is left open for the air connection.

Features:

  • Repeatability: .0001"-.0002"  

  • Air Connection (2x): G 1/4"  

  • Weight: 35.50 kg (78.3 lbs)  

  • Can be operated as duo


Setup Reduction Kits


Setup Reduction Kits allow users to prep one job while another is running. These kits come with one chuck for the work cell and two pallets. One pallet can be loaded into the cell while the other is available for loading and unloading of fixtures or workpieces. When the job is completed simply change pallets and hit Cycle Start.

 

Process Reduction Kits
 

Process Reduction Kits allow users to transfer parts between operations without unclamping the parts. A single pallet moves through multiple orientations while others follow as each operation is completed. Additional pallets are prepared while as the others are being processed.

Starter Kits



Features:

  • Chucks are mounted to universal base plates
     
  • Reduced chuck diameters support tight work envelopes  
     
  • Base plate functions as a reference edge
     
  • Air supply is through the base plate
     
  • Pallet timing pin feature is integrated into chuck face
     
  • 120mm chuck also has a manual option