Fullcut Mill FCR Type is an indexable insert end mill offering supreme cutting performance for your most demanding milling applications. FCR offers lower cutting resistance than any other competitors. A rigid integral body is optimal for all machining centers. The positive high rake sharp cutting edge for both radial and axial directions achieves smooth and quiet end milling.
Designed for shoulder and slot milling, ramping, helical milling, and plunge milling.
A product of:
Supreme cutting performance for your most demanding applications!
- High rake angle and ground cutting edges sharply reduce cutting resistance
- Strong cutting edge reduces edge chipping
- Lower cutting resistance than any other competitors
- For diameters 5/8" - 1-1/4" (16mm - 32mm)
- Achieves 5 times greater DOC than other high rake cutters
- Higher rigidity with integral body and dual contact system
A Variety of Fullcut Mill FCR Types
BIG-PLUS® BCV - Inch Style
Cutting Dia.: .625"-1.250"
BIG-PLUS® BBT - Metric Style
Cutting Dia.: 16mm-32mm
HSK - Metric Style
Cutting Dia.: 16mm-32mm
Straight Shank - Inch Style
ST.750, ST1.000, ST1.250
Cutting Dia.: .500"-2.000"
For Multi Functional Cutting
Low Cutting Resistance
Positive high rake cutting edge for both radial and axial directions achieves smooth and quiet end milling.
Eccentric Relief Angle
Providing an eccentric relief to the cutting edge has been standard for solid end mills since the 1970's and has become the traditional technique in solid end mills. The relief angle is kept small to provide increased strength to the cutting edge without reducing the top rake and sharpness.
Strong cutting edge reduces edge chipping.
A Rigid Integral Body is Optimal for All Machining Centers
Fullcut Mill achieves 5 times greater DOC than other high rake cutters. It performs well in MC and workpieces with low rigidity.
Slotting with dia. 32mm cutter:
Vertical MC: BT40(BIG-PLUS®)
Work material: 1050 Steel
Cutting speed: 394 SFM
Feed rate: .004 IPT
Available in packets of 10pcs.
Cutting dia: .625"-1.250" (16mm - 32mm)
ACZ350S: for general steel
ACZ310: for cast iron
DC20/DS20: for alumimum
Large Nose Radius
After end milling for a distance of 200 feet, a fine surface finish of Ry 4.3um was achieved and maintained, including the corner radius
Work material: Aluminum / Air Blow
Cutting speed V: 1,650 SFM
Feed rate: .006 IPM
Axail DOC Ad: .350 in X 3 times
Bore Dia. 1.5" with Helical Milling
In 1050 Carbon Steel, very smooth cutting with feed rate of 43 IPM and excellent squareness is achieved
Work material: 1050 / Air blow
Cutting speed V: 492 SFPM
Feed rate: 43 IPM
Axail DOC Ad: .079" x 3 times
Honeycomed Pocket with Ramping
In a low rigidity worpiece with .12" thinkness clamped by a vise, feed rate of 169 IPM on both sides of the workpiece is achieved.
Work material: Aluminum / Air blow
Cutting speed V: 2,461 SFM
Feed rate: 169 IPT
Axail DOC Ad: .236" x 3 times