BIG Kaiser Higher Precision Guaranteed
View the site en Espaņol
Search the site:
 
Products >> Accessories >> Chip Fans

Lang Chip Fans: Chip Removal Fans

Lang Chip Fan

Lang Chip Fans provide a safer and faster method of removing chips and coolant from your tables, fixtures and workpieces than conventional air. The Lang Chip Fan can be programmed into your machining cycle to help reduce downtime and make necessary cleaning a part of the work cycle.

 

A product of:

CHIP FAN Flv
>>Click here to download more information on Lang Chip Removal Fans 1.2 MB

Lang Chip Fan in action

As the Machine Spindle Turns, the blades deploy to provide high volume air cleaning power!

  • In-process cleaning without stopping production
  • Saves expensive compressed air
  • No more dripping coolant and flying chips from conventional air hose blasts
  • Less spindle downtime
    for cleaning results in
    increased profits
  • A quieter workplace environment
A Variety of Lang Chip Fans

Lang Chip Fan Model 160

Lang Chip Fan Model 160


Available in metric and inch sizes.

  • Capable of 6,000 to 12,000 RPM with coolant.
  • Rinse with coolant and blow even narrow spaces & milling pockets clean with small diameter rotor blades (160mm).
  • For revolutions of 6,000 to 12,000 RPM (max) with coolant channel, clockwise rotation.

Lang Chip Fan Model 330

Lang Chip Fan Model 330


Available in metric and inch sizes.

  • Capable of 5,000 to 8,000 RPM.
  • Used for quick and efficient blowing of work surfaces & machined pieces.
  • for revolutions of 5,000 to 8,000 RPM (max), clockwise rotation.
  • Full blowing of workpieces and work surfaces quickly
    and efficiently.

coolant through capability

Chip Fan cleaning a workpiece

may be used in all horizontal and vertical machining centers

Lang Chip Fan demonstrating through coolant capability.

A closer view of the same Chip Fan cleaning the workpiece.

The Lang Chip Fan may be used in all horizontal and vertical machining centers
by using a normal chuck with a clamping diameter of 20mm or 3/4".

Repair Kit

4 rotor-blades*, springs, screws and pins.
*Blades will wear with normal use and may require replacement. Maintain & replace as needed.

PRECAUTIONS:

Lang Chip Fan are to be used in enclosed machining centers only!

Rotation of the fans is to be clockwise only!

Follow instructions, do not exceed specified RPMs!

All operators/users of this product should be informed of and must read these instructions. Clean-Tec Fans can ONLY be used in ENCLOSED MACHINING CENTERS! Clean-Tec Fans equipped with either a 0.75" O.D. or 20mm straight shank should be securely mounted in either a collet chuck or end mill holder. Rotational direction clockwise only. Optimum feed rate for cleaning is between 120-390 in/min. Distance from workpiece should be between 4"-6" Upon rotational start-up, program an initial speed of 2,000 RPM (max) before obtaining running speed to reduce the possibility of blade failure due to excessive centrifugal force.