High Spindle: Multiply Existing Spindle Speed
High Speed Machining on Existing Machining Centers Increases Productivity with Greater Accuracy and Superior Finish
- Multiply existing spindle speed 4, 5 or 6 times
- Reduced load to machining center spindle
- High durability through advanced sealing method
- Minimal heat generation
- Maximize performance of cutting tools
- Standard with BIG-PLUS®
- Automatic Tool Change w/ stop block
- Reinforced planetary gear driving system
- High torque transmission
- Multi-directional coolant supply
- High precision New Baby Collet system
Rigidity Increased 1.7 Times
Larger diameter body, spindle with double angular contact bearings, and a reinforced locating pin assembly greatly increases rigidity compared to previous models.
Multi-directional Coolant Supply:
Universal coolant nozzles are capable of being adjusted to suit the length of the cutting tool, ensuring maximum coolant delivery to the cutting edge.
Pinpoint Coolant Jet:
A 1/8" pipe tap thread is provided so that various types of customer supplied coolant-jet nozzles can be utilized which will provide pinpoint delivery to the cutting edge of short tools.
(BCV/BBT taper models only)
High Metal Removal Rate:
Cutter: Solid carbide end mill
ø.236" / 2 flutes
Revolution: 16,000 RPM
Feed Rate: 137.8 IPM
Result: High metal removal rate
2.1 cu. in./min.
Extended Tool life:
Cutter: Solid carbide drill
Material: Duralumin (A-2017)
Revolution: 20,000 RPM
Feed Rate: 78.7 IPM
Result: Extended tool life
1,200 holes by 1 drill
New Baby Collet:
Clamping range: ø.010"
Collet class: AA
Runout: 1 µm at nose
Conventional Machining Center without ATC:
2 different holder styles available, NT50 and cylindrical straight shank. Both offered for GTG4 model only, 15,000 RPM max. Coolant provided through stop bar.