 |
 |
Your
all-in-one Ez to use preset, measure and shrinkfit system.
|
|
|
| |
| Standard
Components & Characteristics: |
|
|
| |
| Integrated
Tool Height Adjustment System -
Through pin mounted inside the spindle body allows for
the fully automatic setting of all shrink fit tooling.
With a 1 micron resolution, this ‘pin’ becomes
a true axis and allows for the highest level of precision.
With over 6" (150mm) of available travel you will
be able to shrink most of your tools without having to
substitute the pin. However, in case of need, the pin
can be substituted from the ‘top’ easily
and securely in about 10 seconds. |
| |
 |
|
 |
|
 |
| *Sample
components during measuring sequence using the integrated
automatic pin |
|
| |
| High-Powered
Multi-Frequency Automatic Positioning Coil -
Ability to shrink any kind of tool ranging from 4mm to
32mm in diameter, including HSS tools. An additional
quick change coil is available for all those tools ranging
from 32mm to 50mm in diameter. The full integration of
the coil system with the Speroni BDI software module
makes the shrinking operation completely automatic and
worry free. The correct settings, positioning, heat time,
etc. will be automatically supplied to the coil, leaving
the operator with the simple task of inserting the tool
in the heated tool holder when prompted. |
| |
 |
|
 |
|
 |
| *The
coil automatically positions itself in the correct
spot, carries out the heating operation, and once finished
(about 2-4 seconds), it automatically moves away from
the tool holder |
|
| |
| Integrated
Cooling System -
Liquid cooled system for the quick and easy cooling of
the shrunk tool assembly. This system has the ability
to cool the tool holder rapidly, about 30 seconds, thus
preventing the heat from traveling into the lower part
of the tool holder. After these initial 30 seconds, the
tool holder can be removed from the spindle and set aside
in order for it to normalize and subsequently verified.
The system comes standard with 3 cooling ring stations
and sleeves. Additional sleeves for specific diameters
can be ordered separately. The system also comes equipped
with normalizing stations for the easy and secure preparation
of the tool assembly before its verification. |
| |
 |
|
 |
|
 |
| *The
cooling sleeve is positioned on the tool holder and
after only 30 seconds, the tool holder can be safely
removed from the system in order to normalize and later
be verified. Under normal operation the base of the
tool holder never gets hot |
|
| |
Click
here to read about additional standard components &
characteristics as well as optional components |
| |
| Features & Benefits: |
| Feature |
Benefit |
| Massive
Rotating Bearing Spindle |
Long
term precision and accuracy. |
| .0003" Maximum
Spindle Run-out |
Exacting
precision in diameter measurements at any gage length. |
| "Built-In" Gage
Reference |
No
need to search for a gage bar or worry that it has been
damaged. |
| All
Cast Iron Structure |
Temperature
will not affect the long term positioning accuracy. No
dissimilar material distortion. |
| Quick
Positioning Axis Releases |
Fastest
positioning available. Axis automatically locks when not
used. Faster and easier to use. |
| Full
Range of Travel Fine Adjustments |
Allows
for extremely fine adjustment of the axis. Faster and easier
to use. |
Ergonomically
Complete System
Design |
All
controls are to the right of the operator, 270 degree access
to the tools while in the spindle. Easier and safer to
load heavy tools. |
| BIG
Kaiser/Speroni Warranty and Service |
Installation
and training for all shifts and a full 1 year warranty
are included at no charge. |
| Options
Are Field Retrofitable and Provide Future Upgradeability |
Never
discard the system, add on as you may need. |
| Branded
(Dell, HP, etc.) Computer Systems |
Future
service and maintenance is provided on-site by the PC manufacturer.
3 year warranty on the PC. Unlike other systems that use
proprietary black box computers, with Speroni you will
never be locked into a situation where you can only get
a PC from the Presetter vendor. |
|
| |
| STP
EzShrink System Advantages: |
| 1) |
Unmatched
and proven measuring and setting accuracy, the longest
in the industry. |
| 2) |
Compact all-in-one
station provides ease of use while requiring minimal
floor space. |
| 3) |
Ability to
set all of your tools and not only your shrink fit ones. |
| 4) |
Included tool
management system for your kits, jobs, tool assemblies,
components and adapters. |
| 5) |
Speroni's
STP EzShrink is a system that delivers exceptional quality
@ an attractive price. |
|
| |
For
More Information:
Click
Here to View the NEW STP-34 Online Catalog (1.21 Mb)
Chascar
aquí para ver el catálogo en línea STP-34
(1.21 Mb)
Presetters
Produce Profit! Click Here to Read More
Click
Here for the Presetter Cost Payback Analysis
Click
Here for a Message From the T.M.S. Department
Click
Here to Visit the Speroni Website
|
| |